Caroline specialises in pâté de verre and casting methods, using clay or wax to create her forms. Sand might be incorporated into her work to add texture and residue, and to ‘ground’ her work, creating a sense of place.

Pâte de Verre (Glass Paste) Process

Caroline’s vessels are created by the pâte de verre process. Initially forms are sculpted out of clay. A fire-resistant mould is made from the original clay form. The clay is removed and the mould cleaned in preparation for the glass. Fine grains of glass (frits) are colour blended and mixed with water and a binder to form a paste. This glass paste is then carefully packed inside the wall of the mould which is then placed in the kiln to fuse the individual grains of glass together. Once fired, the mould is broken to release the glass vessel. The glass is cleaned and polished by hand. Her vessels may undergo further firings – adding single or multiple layers of glass powders and frits (crushed glass) in a process called ‘frittage’ to build surface texture.

Lost Wax Casting Process

Caroline makes a silicone mould from an original found or hand built object. This silicone ‘negative’ is then used to make a wax ‘positive’ of the original object. Once the molten wax has set a fire-resistant mould is poured over the wax form. When the mould has hardened the wax is steamed out to create an empty void. Glass is placed either directly into the mould or contained in a reservoir above the mould and fired to temperatures in excess of 840°C.

Once cast the mould is broken open to reveal the glass. The glass is then ‘cold-worked’ (ground, polished and possibly sandblasted).